Results 1 to 7 of 7
Threaded View
-
11-12-2015, 07:31 PM #3
- Join Date
- Nov 2015
- Posts
- 4
1/ have you created a printrbot support ticket ? They answer within the day usually.
2/ thjis seems more linked to your link to the printer than the printer itself.
3/ do the motors seem hot ?
4/ have you tried to autoprint from a sd card ?
5/ Your gcode file is incomplete. Have you tried to read what's in the file for lines 365 and over ?
Code:G1 X98.843 Y67.041 E16.40095 G1 X99.433 Y67.948 E16.45493 G1 X99.709 Y68.781 E16.49871 G1 X99.816 Y69.493 E16.53463 G1 X99.840 Y70.182 E16.56903 G1 X99.800 Y70.781 E16.59898 G1 X100.339 Y70.798 E16.62588 G1 X101.013 Y70.878 E16.65974 G1 X101.719 Y71.049 E16.69598 G1 X102.512 Y71.389 E16.73903 G1 X103.368 Y72.042 E16.79274
6/ what's the hotend temp when your blob is created ? is your printer trying to get back to target temp ?
I'm wondering if my problem lies in the motor heating up, that might explain the inconsistency. But if the extruder motor got too hot, would that cause the X and Y to stop moving, and the extruder to just push like 5-10 pulses of PLA into a blob? I'm trying to get a video to better explain what's happening but the machine isn't cooperating and I dont have the patience or a set up to sit and record a full print....
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion