Results 1 to 10 of 16
Thread: PEEK Filament for FDM Printers
Threaded View
-
11-05-2015, 06:54 AM #12
BenB,
We've had the best results by printing a thin layer of polycarbonate, then printing the PEEK on that. Be prepared to sand the polycarbonate off - the bond is that good. The PC sticks fine to the glass with the bed at 85C.
Please let me know if you have other questions.
Davo
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)