Results 1 to 10 of 16
Thread: PEEK Filament for FDM Printers
Threaded View
-
11-05-2015, 06:54 AM #12
BenB,
We've had the best results by printing a thin layer of polycarbonate, then printing the PEEK on that. Be prepared to sand the polycarbonate off - the bond is that good. The PC sticks fine to the glass with the bed at 85C.
Please let me know if you have other questions.
Davo
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help