Results 1 to 10 of 11
Threaded View
-
10-31-2015, 11:44 AM #1
Real Life 3D Print NanoSuit from Crysis game.
Hello,
Two months we are working on the project 3D printing life-sized suit of Crysis 3.
Print lasted three weeks, the rest of the time devoted to combining pieces, smoothing, painting, wrapping foil and fine-tuning the details.
The project was shown on October 18/19 3DPeurope in Brussels.
Thank you also for giving consent to the official demonstration, a producer of game company Crytek.
Printing was made at 11 parts per printer ProCoPrint3D / ME sized working area 40/45/55 cm. The printer is equipped with two heads and 8 stepper motors and a 32-bit motherboard.
An important fact is that the print was made without the use of a heated table to hold the model we used glue PROGLU3D PLA-Cold.
http://www.rtbf.be/video/detail_la-s...-3d?id=2052201
http://www.rtbf.be/video/detail_la-s...-3d?id=2052201Last edited by ProCoPrint3D; 10-31-2015 at 11:50 AM.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion