Results 1 to 8 of 8
Threaded View
-
10-01-2015, 03:46 PM #1
- Join Date
- Jan 2015
- Posts
- 445
3d Printer Enclosure for ABS etc... cheaper than most
So I have been looking around for enclosures etc for my taz 5. The ones i found only had a lot of screws and printed parts, and heavy gauge acrylic and cost upwards of 3-$400 to do it the right way.
I came up with my own idea.
I bought a storage rack (24" deep is the key) at home depot. ONe larger piece of .2" acrylic and 2 small pieces of .93". Used dollar store foam board for the back. Thew it all together in a few hours and voila.
Less than $200 all in, and it works like a charm.
https://youtu.be/JZ04kAm6wk4
Edit : also posted this on the taz boards, but this gets more traffic, so in case someone wants to duplicate it... super easy.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion