Results 1 to 4 of 4
Threaded View
-
09-30-2015, 10:59 PM #1
- Join Date
- Sep 2015
- Posts
- 4
As layers build, nozzle begins to touch model causing uneven layers
As the model bulds, the nozzle begins on one side causing uneven layers. I'm not sure what's causing the issue, I've leveled the plate a few times, and regardless of where my origin is, the model always produces a layer on one side higher than the other, eventually causing a significant misalignment. Any advise would be helpful
file1.jpgfile2.jpg20151001_000732.jpg
The cone is the best example of the issueLast edited by nothing551; 09-30-2015 at 11:06 PM.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help