Results 1 to 10 of 14
Thread: Bed warped suddenly?
Threaded View
-
09-29-2015, 07:23 AM #6
What Temp is Bed-plate at ?
If you are using PLA filament you can lower temp to 60 or 70 C and get good prints.
Maybe lowering temp will keep bed-plate from warping so much ?
Note: remember that Temp on top of Glass is about 15 C lower than indicated temp
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion