Results 1 to 4 of 4
Threaded View
-
09-27-2015, 08:56 AM #1
Temperture shown at printer display Not always correct !
Using a calibrated digital thermometer, attached to nozzles,
we found that right-nozzle averaged about 14 C Hotter than temp displayed at printer
and left-nozzle averaged about 6 C Hotter than displayed.
So, we lowered Temp setting in Host/slicer software by those amounts
and printed objects were much better.
Not sure if error is caused by Thermocouple-wires or the Motherboard circuit.
Maybe someday I'll replace T-wires to determine if they cause it.
Note: Bed-plate temp, on top of added glass, averaged about 12 C cooler than Indicated temp at display.
The Fan cooling X & Y stepper-motors is probably cooling the glass.Last edited by EagleSeven; 09-27-2015 at 09:26 AM.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion