Results 1 to 5 of 5
Thread: Large spiral vase
Threaded View
-
09-17-2015, 10:49 AM #1
- Join Date
- Feb 2015
- Posts
- 29
Large spiral vase
This large vase printed in 34 hours 12 minutes with a layer height of 0.200mm. I sliced it with Simplify3D and had no problems with printing other than a fair number of hairs. I used a hair dryer and a little sandpaper to get rid of these .
1.jpg
2.jpg
3.jpg
I have done a number of experiments involving retract length, retract speed, Z-lift, and varying temperature, and it seems that it is just not possible to eliminate hairs with a Bowden-tube style printer.
You can get the STL File for this part here:
http://www.thingiverse.com/thing:1020197
or here:
https://pinshape.com/ite.../10372-3d-printed-large-spiral-vase
Last edited by bbinnard; 09-19-2015 at 12:22 PM.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help