Results 1 to 4 of 4
Threaded View
-
08-31-2015, 03:46 AM #1
- Join Date
- Aug 2015
- Posts
- 9
Printer randomly rebooting when printing, can reproduce by using Jog on Y axis
Hey !
Iv had my CTC 3D printer for around 3 weeks now and have been loving it. However, it has now developed a fault.
The printer is randomly rebooting or freezing during prints. usually the screen also shows bogus characters when this happens but usually its just a full reboot of the printer.
I have traced the problem back to the Y Axis. If I use the JOG mode and move the head up and down the Y axes after a few runs the axes shudders slightly (makes a slightly jerking noise and stutters) a few times and then the printer will crash and reboot if I continue to JOG the axes for a few more seconds.
I have tried switching the Y axes Steppe modules with a extruder steppe modules however it has not made a difference.
I have also visually checked the wiring and it seems fine. The Y axis cabling doesn't actually get moved around like the X axis cabling...thought that could be the cause.
Im now at a loss, and I really want to get back to printing!
Any suggestions guys??
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help