Results 1 to 3 of 3
Thread: Weird start behavior
Threaded View
-
08-27-2015, 10:20 AM #1
- Join Date
- Feb 2015
- Posts
- 371
Weird start behavior
I have a custom start g code for my printer. I have it go through the standard ABL procedure then go to the front corner to finish heating up. After that it performs a wipe procedure to knock off the ooze on a wiper I have clipped to the side of the bed.
It was working great! Now all of a sudden it won't go to the corner and extrude. It moves there, heats up, but won't extrude the filament I call for it to extrude. Nothing in the code has changed that I can see. The only thing I have changed is add a print cooling fan but I fail to see how that could cause the filament not to extrude. It isn't even on.
Here is the code from my slicer...
G1 Z5 F50 ; lift nozzle
G28 ; home all axes
G29
G1 Y280 X307 F6000
G1 Z0.1 F50
M109 S[first_layer_temperature]
G90
G92 E0
G1 F50 E8
G92 E0
G1 Y100 F6000
G1 Y160 F6000
G1 Y30 F6000
G1 X280 F2000
and here is the code from a code file...
; generated by Slic3r 1.1.7 on 2015-08-27 at 09:24:35
; perimeters extrusion width = 0.40mm
; infill extrusion width = 0.67mm
; solid infill extrusion width = 0.67mm
; top infill extrusion width = 0.42mm
G21 ; set units to millimeters
M107
M190 S65 ; wait for bed temperature to be reached
; 12" i3v 3mm PLA for .40mm E3dv6
G1 Z5 F50 ; lift nozzle
G28 ; home all axes
G29
G1 Y280 X307 F6000
G1 Z0.1 F50
M109 S200
G90
G92 E0
G1 F50 E8
G92 E0
G1 Y30 F6000
G1 X280 F2000
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help