Results 1 to 4 of 4
Threaded View
-
08-19-2015, 07:05 PM #4
Yep. If you want to experiment, I'll offer the gcode snippets in the LINEAR CONCENTRIC SQUARES TEST post in the Marlin Motion Related Configuration.h Settings for MakerFarm i3v thread. They provide non-extrusion movements that can be used to observe the printer over a range of distances at both printing and movement speeds. I provide gcode there for both the 2014-era MakerFarm defaults and the tweaked values I settled on via testing. Use a text editor or an integrated gcode editor like that in Repetier Host to tailor values in the gcode commands as you wish.
I found the concentric squares approach very instrumental in learning how different acceleration settings affects the movement speeds achieved over various distances.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help