Results 1 to 2 of 2
Threaded View
-
08-17-2015, 02:08 AM #1
- Join Date
- Jul 2015
- Posts
- 8
First trial of ABS 3D printing- silicon bumper mold
This was my first work on ABS printing, I used spray for adhesion, maybe the size is small, spray worked well. Considering to get some acetone for surface treatment.
IMG_20150817_142451.jpgIMG_20150817_145958.jpgIMG_20150817_142607.jpg
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion