Results 1 to 10 of 10
Threaded View
-
07-16-2015, 08:45 PM #1
- Join Date
- Jul 2015
- Posts
- 5
Makerbot Replicator 2 printing problem
Hi, I've got a Replicator 2 with 600 hours on it and it suddenly won't print. I can change the filament fine, and feed it for a while. but when I load a project it doesn't feed the PLA and starts clicking. I've disassembled, cleaned & replaced the drive gear, but no change. I've also raised the temp from 230 to 240 but nothing. Any advise would be greatly appreciated.
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion