Results 1 to 10 of 13
Threaded View
-
07-14-2015, 08:53 AM #11
- Join Date
- Apr 2015
- Location
- Chicago
- Posts
- 42
Hmm that's a good idea
Filament was set to 1.77 and it's 1.75 diameter so I changed that.
Print speed is 50 and travel speed is 150mm. These are all default setting I never changed anything. So i'll try what you said and i'll knock the speed down to 100 and see if that makes a difference.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion