Results 1 to 8 of 8
Threaded View
-
06-29-2015, 10:36 PM #1
- Join Date
- Jun 2015
- Location
- Sydney Australia
- Posts
- 36
Flashforge Creator Pro - adjusting Y Axis
New to 3D Printing got my Flashforge Creator Pro 2 weeks ago, having a great time learning how to use, just notice when printing the 20mm cube my micrometre shows the following measurements:
X Axis: corner edge 19.77mm/middle edge 19.70mm/centre 19.57mm
Y Axis: corner edge 19.57mm/middle edge 19.51mm/centre 19.43mm
Z Axis: corner edge 20.04mm/middle edge 20.05mm/centre 20.02mm
I averaged out the above figures, it looks like the centre of the cube has caved in so I'm going to print using 100% solid and see if that will improve, however my X and Y axis looks like it requires adjusting, does anybody know how to go about adjusting these axis?
Much appreciate your help.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help