Results 1 to 5 of 5
Thread: EMO-25 real examples?
Threaded View
-
02-05-2014, 06:35 AM #2
cipher0,
I am not aware of any clay items that have been fired. That identifies a serious gap, and I will bring this up to the team.
We normally print clays in 500-600 micron layer heights (due to the thickness of the material) through a 1mm nozzle.
-Davo
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion