Results 1 to 10 of 52
Thread: Clogged nozzle
Threaded View
-
06-11-2015, 01:54 PM #36
heat your nozzle up and pull the junk off with a rag or a glove. wipe as much as you can off. maybe some acetone on a rag for any tough residue once you cool it back down. maybe go past your printing temp a little to help melt it off. then go after your clog.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion