Results 1 to 6 of 6
Threaded View
-
06-10-2015, 07:10 PM #6
- Join Date
- May 2015
- Posts
- 49
Home is the front right corner. After some investigation, I have confirmed that the X-Axis limit switch on the right is used for the X-Max connection. Settings in firmware have the X-Axis inverted, and I've discovered (new to me, you guys probably knew this) that Repetier-Host needs to be told about this. Once I told it, everything fell into place and all is well. It even makes sense. Thanks,
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion