Results 1 to 4 of 4
Threaded View
-
06-01-2015, 10:28 PM #4
- Join Date
- Jan 2015
- Posts
- 62
Everytime I print in PLA, I set the temperature of platform to 80 degrees. You can buy special glue for ABS, it works! Sometimes when I am out of ABS glue, I use common glue temporarily, and it works too, but it's very hard to get the printed model from platform after printing.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion