Results 1 to 10 of 22
Threaded View
-
05-25-2015, 07:36 PM #3
Don't know of anyone who has used it. When I built my i3v-8, I figured it might have originally been for a screw to be used with the original Z-endstop switch, similar to the screw on the Y-bed used with the Y-endstop. It's not in the right position for even that, but that's the best I could come up with.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion