Results 1 to 7 of 7
Thread: Infill troubles
Threaded View
-
05-11-2015, 08:52 PM #1
- Join Date
- May 2015
- Posts
- 3
Infill troubles
I am having trouble with my infill on my DIY Corexy printer and marlin software. All of the motor steps are calibrated. I am using 1.75mm PLA with a E3d v6 0.4 nozzle.
The picture is at
0.2mm layer height
15% fill density
line pattern
infill 40mm/s
solid infill 40mm/s
DSC_0063.jpg
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion