Results 1 to 3 of 3
Threaded View
-
05-03-2015, 03:30 PM #1
Uploading new Firmware to Rumba over LAN
Does anyone know of a way to upload new firmware to a Rumba board over the LAN rather than USB.
By "over the LAN" I am referring to a setup that has OctoPi running on the Raspberry Pi which is connected to the Rumba by USB and to the computer that does the compiling by LAN.
Thanks
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion