Results 1 to 10 of 30
Thread: 10" Y Plate
Threaded View
-
04-28-2015, 09:42 AM #13
- Join Date
- Nov 2014
- Location
- Brevard, NC
- Posts
- 182
I spoke too soon. The ABS lifted up from a corner on the BuildTak surface after about an hour an half of printing. I will try one more print with the new version using PETG at .7 infill & see if those 2 changes will fix the problem.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion