Results 1 to 1 of 1
Thread: Test print part
Threaded View
-
04-27-2015, 06:42 PM #1
- Join Date
- Feb 2015
- Posts
- 29
Test print part
Here is a colored and rendered image of a model I made for testing my Atom2 3d printer:
printertest.jpg
And here is a video of the finished part:
https://drive.google.com/file/d/0B3E...ew?usp=sharing
Note that the print was made with no support structure. Congrats to the Atom2 team for designing a machine that can do something like this with no supports.
The bolt does not fit in the bolt hole because I did not allow enough clearance. But the threads on both the bolt and the hole look good.
The part should be printed at a larger size - probably twice the actual size I printed.
If you want to experiment with this model you can download it here:
https://drive.google.com/file/d/0B3E...ew?usp=sharing
The STL file is 73.86 MB and has been run through the Microsoft Model Repair service.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help