Results 1 to 3 of 3
Threaded View
-
04-27-2015, 04:28 PM #1
Simply Rotating my object on the print bed helped with adhesion
I was experimenting to solve a problem. Part of an object kept rising off the bed and making the final print rough and misshaped... I rotated it 90 degrees and that fixed it. What I think now, after lots of suggestions from other forums, is that the fan is more effective from certain angles at cooling the different parts of the object based on position - and in the new position, the vulnerable section was better cooled.
I have a video and lots of images on this blog post: http://goo.gl/C7WDNF
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion