Hi all,

Does anyone have experience with small (<50mm) prints at good quality on a Z18 as parts only come out correctly at larger sizes. Often stringing on the base.


  • 0.15mm resolution
  • 5th Gen High Base
  • 200 °

    • Lower to 180 ° on Color Fabb to stop raft stick

  • Roof layer count 4
  • Shells 2
  • Outlines 15

    For moving parts I change:
  • "feedDiameter": 1.80,
  • "feedstockMultiplier": 1.10 on small parts doesn't work tried higher values but too many holes in prints