Results 1 to 10 of 27
Threaded View
-
04-17-2015, 11:42 AM #24
- Join Date
- Mar 2015
- Location
- Palo Alto
- Posts
- 63
Get some blue painters tape. Lay it across the bed as flat as you can with minimal gaps between strips (or just use the 2"+ wide stuff for the small parts). Then you can print PLA with a cold (room temp) bed.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion