Results 1 to 2 of 2
Threaded View
-
03-25-2015, 08:01 AM #1
- Join Date
- Dec 2014
- Location
- Canada
- Posts
- 498
ABS Warping and Seperation Frustration using PEI
Things were working so well..not sure whats going on now
I ended up Taping down my PEI Sheet to my 1/4" glass bed
to help with flatness for more layer consistency. since then
Ive been having alot of problems with anything sticking to the PEI
I wet sanded the PEI sheet with 1000 grit, and cleaned it with 70% ISO Alcohol
Double checked my first layer height...
Bed temp 120, Hotend 235-245 with Black ABS
.40 nozzle E3Dv6 .3mm layer
35% Fill
150% first layer width
Tried using Skirts.. doesnt seem to help
I partially enclose my printer with cardboard to prevent drafts
doesnt seem to matter if the bed has been heating for 30 min prior to printing.
Using ABL
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help