Results 1 to 7 of 7
Threaded View
-
03-24-2015, 03:41 PM #1
- Join Date
- Feb 2015
- Location
- Pinehurst North Carolina
- Posts
- 9
Now I cannot get the parts off the bed......
I'm using ABS on a heated bed at 100 C and kapton tape with a very light acetone/ABS wipe. Now I cannot get the parts off the bed. I can wiggle a putty knife under the printed parts but they generally get damaged in the process. Any ideas?
Thanks,
Chris
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion