Results 1 to 10 of 109
Threaded View
-
03-23-2015, 10:10 AM #12
- Join Date
- Mar 2015
- Location
- Coraopolis, PA USA
- Posts
- 20
Thanks again Roxy. I plan on plugging my Servo into MX1 and from the manual for my board it would be PWM pin PA0. Not sure if that info has been put into Configuration.h or not. I'm at work so can't check it. I do know from the OP that it is or was in Pins.h
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion