Results 1 to 4 of 4
Thread: Made a simple cable guide.
Threaded View
-
02-27-2015, 11:59 AM #1
- Join Date
- Feb 2015
- Posts
- 211
Made a simple cable guide.
I was having issues with the extruder/x-carriage cable assembly getting in the way of the x-carriage home switch sometimes while homing and also just generally being in the way while printing. I made this guide to hold the cable assembly out away from the printer a little bit to keep it out of the way. It worked out pretty well so I thought I would share it. I just mounted it with some cable ties but you could put a few screws in it if you wanted instead.
http://www.thingiverse.com/thing:700841
Thanks,
Chadd
Printer will print perfect...
Yesterday, 10:44 AM in Tips, Tricks and Tech Help