For one reason or another, I tore off the insulation tape on my Replicator 2. As a result it would not hold high enough temp for longer than time it took to print 3-4 layers on a small object. After looking around locally, I found Ace Hardware has flue tape which I'm picking up tomorrow to "fix" my Rep2.

The product is made by 3M and rated to 600F, see below. I could from a vendor on Amazon.com with the exact holes cut out and dimensions it originally came with, but wanted it sooner than later plus its cheaper. I get 15' at 1.5" wide whereas for the same price I would receive 1 replacement strip from Amazon.com vendor.

http://www.acehardware.com/product/i...ductId=1273881