Results 1 to 5 of 5
Thread: A couple of questions
Threaded View
-
02-19-2015, 06:12 PM #1
- Join Date
- Dec 2014
- Posts
- 43
A couple of questions
So I got my 12" with RUMBA board and put it together pretty easily and then did some pretty good test pieces. So I have 2 questions. How tight should the springs on the extruder be. And when the hotend is heating up I get some material coming out when the extruder is not turning. I am using Cura PLA 210 hotend and 70 bed.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion