Results 1 to 5 of 5
Thread: A couple of questions
Threaded View
-
02-19-2015, 06:12 PM #1
- Join Date
- Dec 2014
- Posts
- 43
A couple of questions
So I got my 12" with RUMBA board and put it together pretty easily and then did some pretty good test pieces. So I have 2 questions. How tight should the springs on the extruder be. And when the hotend is heating up I get some material coming out when the extruder is not turning. I am using Cura PLA 210 hotend and 70 bed.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help