Results 1 to 9 of 9
Thread: My first angry shot
Threaded View
-
01-14-2014, 04:39 AM #1
My first angry shot
After some help from Colin Farrer of MakerFarm, I made my first useful print today. They are the two gears from the Wades Extruder. They are not the ones supplied with the kit, but will do for backups.
A couple of things that I found to be important:
1. It is essential to set the Z-Axis endstop so the gap between the bottom of the extruder nozzle and the hot bed is between 0.1 and 0.3mm (4 thou - 10 thou")
2. The hot bed glass has to be squeaky clean and dust free before it is sprayed with Garnier-Fructus Maximum hold hairspray.
I've attached a couple of photos.
.On Hot bed.jpgClose up.jpgLast edited by old man emu; 01-14-2014 at 06:55 PM.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)