Quote Originally Posted by gmay3 View Post
Good stuff! You're welcome!

Here's a repost of one of mine for N5QM who asked what printer mods are good to collect and get started with.

Repost below:
To respond to your question about mods to print, here are some I use and would reccomend. I've bolded ones that you should print and use right off the bat and are easy prints, and other unbolded ones that you can (in my opinion) grow in to

1. clough42 - LCD Spacer, Sorbothane Isolation Feet, Print Cooling Fan, Adjustable Z endstop, Improved Hexagon Cooling
2. zen1 - Pushfit Belt Guide (print one for the x and the y)
3. swiddie - One Tool Belt Adjustment Bracket
4. schlotzz - RAMPS 40mm fan mount
5. benlew - i3v Control Knob
6. neonpolaris - Spool Mount Smoother
7. gmay3 - (shameless plug) Snap on LED Tray, Rear mounted spool holder (upgrade after using the stock makerfarm holder + neonpolaris spool smoother)
Thanks @gmay3!

I've collected your suggestions plus some other initial prints gathered from other topics here.

One thing I was't able to find is the extruder gear set. It seems everyone agrees that having a spare printed set is a must. Right?

BTW as per @MiniMadRyan tip, the order for a 10x10 BuildTak sheet has been placed.

Here is my current collection of things to make thus far:

https://www.thingiverse.com/Renfro/c...things-to-make