Results 1 to 10 of 11
Thread: Beginner questions
Threaded View
-
02-06-2015, 10:54 PM #9
- Join Date
- Feb 2015
- Posts
- 17
This actually gave me an idea. I tried covering the handles, that didn't help, I tried to up the platform temperature to 120, that seemed to make it even worse. So I went the other way. Put more hairspray on the platform and dropped temperature to 100. Looks like it goes a long way towards eliminating corner lifting. I suspect that the problem is not that ABS was too cold, but just the opposite: with the platform at 115+ and full enclosure, the print remains too warm and too flexy.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion