Results 1 to 4 of 4
Thread: Power on nothing happens....
Threaded View
-
01-31-2015, 10:13 AM #1
- Join Date
- Jan 2015
- Posts
- 48
Power on nothing happens....
OK So I loaded firmware onto my ramps board and that seemed OK. I then mounted the circuit board to my i3v and attached all the wiring.
When I flip the power on my power supply, nothing happens.
I double checked that my power supply is providing about 12.4V to both the 5amp and 11amp connectors.
I know that the 12V is getting to the board, but I don't know what to do now... No lights no display.
Any help would be greatly appreciated.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help