Hiya all,

thought id ask the question.

im looking at the wanhao duplicator 4S.
in addition I want to work with simplified 3d. (I know, it costs :-(. )

1) am I right in saying simplified 3D also controls the printer in addition to producing the Gcode. Making the original software that comes with the printer redundant.

2) can the resolution be improved from 0.1mm? I was wondering if the machine is physically able to step in layers of less than 0.1mm then the slicing software could be set to a lower value. GCode generated and the machine to just follow the code. This is obviously if the hardware can step in the programmed layer thickness.

3) has anyone changed the nozzle from the standard 0.4mm to a 0.2mm nozzle?

many thanks

Becky