Results 1 to 10 of 43
Thread: Anyone recognize this motor?
Threaded View
-
01-20-2015, 11:19 AM #34
- Join Date
- Jun 2014
- Location
- Burnley, UK
- Posts
- 1,662
M103 ;disable RPM M73 P0 ;enable build progress
G21 ;set units to mm G90 ;set positioning to absolute
(**** begin homing ****)
G162 X Y F2500 ;home XY axes maximum
G161 Z F1100 ;home Z axis minimum
G92 Z-5 ;set Z to -5
G1 Z0.0 ;move Z to "0"
G161 Z F100 ;home Z axis minimum
M132 X Y Z A B ;Recall stored home offsets for XYZAB axis
(**** end homing ****)
G1 X-141 Y-74 Z75 F3300.0 ;move to waiting position
G130 X20 Y20 Z20 A20 B20 ;Lower stepper Vrefs while heating
M6 T0 ;wait for toolhead, and HBP to reach temperature
M70 P5 (We Be Making Things!)
G130 X127 Y127 Z40 A127 B127 ;Set Stepper motor Vref to defaults
M108 R3.0 T0
G0 X-141 Y-74 ;Position Nozzle
G0 Z1 ;Move above plate
G1 Z0.3 ;Position Height M108 R5.0 ;Set Extruder Speed
M101 ;Start Extruder
G4 P3000 ;Create Anchor
G1 X-137 Y-70 Z0.1 F1000.0 ;Slow wipe
G0 Z0.3 ;and lift
This is the beginning of the Gcode that I have. I see the first option you mentioned but not the second. Where should I add it?
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help