Results 1 to 10 of 12
Thread: Brim Adhesion
Threaded View
-
01-20-2015, 08:18 AM #1
- Join Date
- Dec 2014
- Location
- Canada
- Posts
- 498
Brim Adhesion
Having issues with my Brim sticking down to my glass printing with ABS
I prep my glass.. Soap & water, then Iso Alcohol, then ABS Juice x 3 coats and then some hair spray
120 bed temp
245 nozzle temp
bed is level
My Brim is all over the place.. not sticking well
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion