Results 1 to 4 of 4
Threaded View
-
01-15-2015, 10:09 AM #1
- Join Date
- Nov 2014
- Posts
- 2
Flashforge Creator Pro - X axis grinding and layer-shift
Hi everybody,
we are MonzaMakers from Italy and this is our first thread on this forum.
we bought a FlashForge Creator Pro on october2014 and we were really satisfied about this printer,
we printed a lot of object with different material and shape without any problem, untill last week...
we printed this model without any problem:
so we proceed to print another copy with the same parameters, but when we check the printer we found this:
after have cleaned the plate, we retry to print another copy and we find this kind of problem with the x-axis:
the x-axis continuously blocks so evey layer is shifted on the right.
we search on a lot of 3d-printing forums and we check the usually causes:
- sobstitution of stepper-motor: we change the x-axis stepper with the left extruder stepper (they are the same) but it doesn't solve our problem
- sobstitution of stepper-driver: we try to invert the x driver with the y driver but the error is always on x axis
- check for obstruction on the guide: we check and lubrificate it but itsn't the problem cause
anyone can suggest us another solution for this problem??
thank you very much for your reply
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion