Results 1 to 4 of 4
Thread: Cracking on large prints only
Threaded View
-
01-12-2015, 06:43 PM #1
- Join Date
- Nov 2014
- Posts
- 12
Cracking on large prints only
I am getting cracking on large prints only
Can I get advice on what to change, I tried different infills and seems the more the infill the worse.
It got a little better with lower layer height but I really don't want to go down to 0.1 as it will take to long, I want to make several.
Creator Pro
ABS - BuMat
I don't want to use PLA if possible
Infill 20%
Shells 2
Layer Height: 0.22
Temp 230
Bed: 110
Extrude 60 mm/s
Travel 80 mm/sLast edited by gencode; 01-12-2015 at 06:55 PM.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion