Results 1 to 10 of 52
Thread: Clogged nozzle
Threaded View
-
01-10-2015, 04:15 PM #1
Clogged nozzle
Somehow I clogged the nozzle of my Hexagon 1.75mm. What is the best way to get it cleaned out. I had finally gotten my printer to work thanks to prinbus helping me with a pebkac issue. I had 3/4 printed the test cube, and all of a sudden the printer was still moving but no filament was coming out.
Todd
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion