Results 1 to 2 of 2
Thread: rambo skipping steps?
Threaded View
-
01-10-2015, 02:10 PM #1
- Join Date
- Dec 2014
- Location
- Canada
- Posts
- 498
rambo skipping steps?
how can i tell if my stepper is missing steps
this is my current setting for the rambo firmware for the pots
#define DIGIPOT_MOTOR_CURRENT {100,100,100,100,100}
should these be 135?
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion