Results 1 to 10 of 22
Threaded View
-
01-01-2015, 05:05 PM #1
- Join Date
- Dec 2014
- Posts
- 14
Build up on corners and curves causing prints to fail.
Printing things with a large base has been no issue for me yet, but I cant seem to print things with a small base, even with a raft. I'm new to 3d printing, and I can't seem to findout why its doing this. Currently I'm printing at 50mm/s and 80mm/s travel. 230 extruder temp, 112 bed temp. I've tried faster movement, 80mm/s for both feed and travel. I tried playing with the bed temp as well, moving it up to 115 and 120, both with the same result.
https://drive.google.com/file/d/0B_O...ew?usp=sharing
https://drive.google.com/file/d/0B_O...ew?usp=sharing
The extruder ends up catching the build up and pulling the print off the board.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion