Results 1 to 8 of 8
Thread: Tolerances Between Objects
Threaded View
-
12-22-2014, 03:48 AM #8
- Join Date
- Dec 2014
- Location
- Denmark
- Posts
- 4
When you want to print several parts and fit them to getter. Then tolerence is a good idea.
Because, the prints aren't 100% the size you designed. So to be sure that the parts fits to getter, use tolerence.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion