Hi all, first time 3D printer owner here. I picked up a PowerSpec 3D Pro (Flashforge Creator Pro clone) a few weeks ago and still haven't managed to print anything substantial due to print quality issues.

First few layers look okay, but then it's downhill. The print below was using the latest version of Makerbot Desktop, 100% infill, 2 shells, .2 mm layer height, extruder temp 228C, build plate 110C, 30 mm/s extruding, 40 mm/s traveling. Using a black ABS from Micro Center, on a sheet of glass with hairspray.

Any ideas why this is happening?

3d_1.jpg3d_2.jpg

Cheers,
Stefan