Results 1 to 2 of 2
Thread: My latest model
Threaded View
-
12-26-2013, 07:03 PM #1
- Join Date
- Dec 2013
- Posts
- 1
My latest model
Hello all,
I have just joined this forum and thought I would show my latest design.
pen_cases3.jpg
These are some screw top cases I designed to hold pens I'd bought as gifts for family. It was one way to get out of wrapping them up:-)
These were printed using a range of 1.75mm PLA on my Ordbot (with a .35mm nozzle).
If you want to print one then the model is available on Thingiverse:
http://www.thingiverse.com/thing:212148
Feedback is welcome...Last edited by loubie; 12-26-2013 at 08:01 PM.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion